
3 HOLE INSTALLATION NO SIDE SPRAY
5 INSTALLING DECKPLATE
Ensure that the Plastic Putty Plate (5A) is pressed on the Deckplate (5B). Place
a bead of plumber’s putty in the groove along the outer edge of the Putty Plate
(5A). Install the Deckplate (5B) over the three holes in your sink.
6 SECURING DECKPLATE TO DECK
6A) to Mounting Posts (6C).
Caution: do not over-tighten wing nuts. Remove any excess putty from
around the outside edge of Deck Plate (6B).
Go To Step 17
STOP
3 HOLE INSTALLATION WITH SIDE SPRAY
7 INSTALLING DECKPLATE
Ensure that the Plastic Putty Plate (7A) is pressed on the Deckplate (7B). Place
a bead of plumber’s putty in the groove along the outer edge of the Putty Plate
(7A). Install the Deckplate (7B) over the three holes in your sink.
8 SECURING DECKPLATE & HOSE GUIDE
Insert Hose Guide (8A) into the side hole in the Deckplate (8B) and onto the
sink hole. Align the hose guide Tabs (8C) to those in the Deckplate Hole (8D).
8A) by screwing the Plastic
Locknut (8D8E) by screwing Wing Nut (8F) to Mounting
Post (8G). Hand tighten. Caution: do not over-tighten. Remove any excess
putty from around the outside edge of Deckplate (8E).
9 SIDE SPRAY INSTALLATION
9A) through the Hose Guide (9B
9A) back up through the center hole of sink
and through Deckplate (9C) so that it is above the sink.
Go To Step 16
STOP
2 HOLE INSTALLATION
(For T34-4T Models Only)
10 INSTALLING MOUNTING RING & GUIDE FLANGE
Place Mounting Ring (10A) over Plastic Gasket (10B) and sink hole. If desired,
(10C). Align both Mounting Ring (10A10C) to the
center of sink holes.
11 SECURING HOSE GUIDE
Insert Hose Guide (11A11 B) and onto the sink hole.
11A ) by screwing the Plastic
Locknut (11C). Hand tighten.
5
6
7
8
9
10
11
;
4DE/B
5B
6B
7A
5A
6A
6A
7B
8E
8D
8G
8A
8C
8B
8B
8D
8A
6C
6C
9A
9B
9C
10A
10B
10C
11A
11B
11C
Comentários a estes Manuais